IDtell

TELLUS SMART STATION

The right way to organize IT infrastructure

Complex solution of office tasks

Telephony organization (mini-PBX, DECT base station)

Customization of internet access and local network

Connection of peripheral devices

Organization network storage NAS

Smartstation interface

1 minute

Setting up a local network and WI-FI network

7 minutes

launch kit from 10 business phones

10 minutes

PBX setup

idtell.kz

Smart Station Features

Office PBX

  • 27 subscribers
  • ASR auto routing

DECT-station

  • up to 5 tubes
  • 4 calls simultaneously

Wi-Fi router

  • Online Channel Reservation
  • 3G / LTE modem support Yota, Beeline, MTS and Megafon
  • 802.11a/Ь/g/n standards
  • 2.4 GHz and 5 GHz bands
  • Intellectual Prioritization System трафика QoS
  • AutoRouting ASR Calls

Voip-gateway

  • for IP telephony

Принт- и медиа-сервер

NAS network storage

  • with DLNA support

What can I connect?

Power from the outlet

TEL inputs
for analog phones
(or, for example, for a fax)

Two USB inputs
can connect external
expansion drive
network space,
mobile modem
or the same printer

LAN inputs
when need
connect computers
via ethernet cable

WAN input
useful if
in the office cable
the Internet

LINE
to connect
telephone
analog line
cable “from the shield”

Technical specifications

  • Dual Band Wi-Fi (2.4-2.5 GHz and 5 GHz)
  • MultiSSID support and guest access
  • WDS repeater (Wi-Fi repeater)
    Embedded Media
  • Server (DLNA UPnP)
  • FTP and SMB server
  • USB 3G / LTE modem support
  • IPTV support
  • IPv6 support

Integrated PBX
Built-in DECT base
VoIP gateway, work with analog phones and PSTN lines
Call order and callback
Call recording
27 subscribers in total, including:

  • 20 SIP;
  • Analogue (FXS)
  • 5 DECT.

21 External lines / trunks of all, including:

  • 20 SIP;
  • 1 Analog (FXO).

5 DISA / IVR (auto attendant)
100 speed dial entries (phone book)
Wi-Fi – IEEE 802.11a / b / g / n, 2 × 2 MIMO, 2.4-2.5 and 5 GHz
WAN ports – 1 x 10/100/1000 Base-T
LAN ports – 4 x 10/100/1000 Base-T
USB – 2 x host, type A, v2.0
DECT – GAP / CAT-iq 2.0
Dimensions (W x D x H) – 215 x 155 x 31 mm
Weight – 469

Internet access organization

  • Ethernet, USB 3G / LTE

Wireless access point

  • 802.11.a / b / g / n standard up to 300 Mbit / s

Guest Access
DECT base station

  • 802.11.a / b / g / n standard up to 300 Mbit / s

NAS NAS

  • with DLNA support

Built-in print server

  • when connecting an external usb printer

Online Channel Reservation
2 Wi-Fi bands at the same time

  • 2.4 GHz and 5 GHz

City telephone line
Automatic call routing

  • ASR

Intelligent QoS Traffic Prioritization System

Ethernet / FastEthernet / GigabitEthernet

  • 1 WAN + 4 LAN

DECT-GAP / CAT-lq

  • v 2.0

TEL (FXS)

  • 2 ports for connecting analog phones

Wi-Fi

  • ASR

LINE (FXO)

  • 1 port for connecting to the PSTN line

USB 2.0

  • 2 pcs.

Standards Supported

  • IEEE 802.11 a / b / g / n (connection up to 300 Mbps)

2 ranges at the same time

  • 2.4 GHz and 5 GHz

WLAN encryption

  • 802.11.a / b / g / n standard up to 300 Mbit / s

Guest Wi-Fi access
MultiSSID

  • up to 4 networks simultaneously

WMM support

Supported Protocols

  • SIP, SDP, RTP

Supported codecs

  • G.711 A-law, G.711 u-law, G.729, GSM, G.726, G.722, PCM

DTMF type

  • RFC 2833, SIP INFO, Inband mode

Fax

  • G.711 (Pass-through)

Echo cancellation function
Voice processing

  • VAD, CNG, PLC

Jitter buffer

Network Storage Features
Remote access to resources on the NAS

  • using FTP and SMB

Restricting Access to NAS Resources

  • for different users

Mini PBX “Tellus” with stand
Power Supply
PC cable

Telephone cable
8GB USB Drive
User’s manual